Crystal-Phase-Engineered High-Entropy Alloy Aerogels for Enhanced Ethylamine Electrosynthesis from Acetonitrile.

Crystal-phase engineering that promotes the rearrangement of active atoms to form new structural frameworks achieves excellent result in the field of electrocatalysis and optimizes the performance of various electrochemical reactions. Herein, for the first time, it is found that the different components in metallic aerogels will affect the crystal-phase transformation, especially in high-entropy alloy aerogels (HEAAs), whose crystal-phase transformation during annealing is more difficult than medium-entropy alloy aerogels (MEAAs), but they still show better electrochemical performance. Specifically, PdPtCuCoNi HEAAs with the parent phase of face-centered cubic (FCC) PdCu possess excellent 89.24% of selectivity, 746.82 mmol h-1 g-1 cat. of yield rate, and 90.75% of Faraday efficiency for ethylamine during acetonitrile reduction reaction (ARR); while, maintaining stability under 50 h of long-term testing and ten consecutive electrolysis cycles. The structure-activity relationship indicates that crystal-phase regulation from amorphous state to FCC phase promotes the atomic rearrangement in HEAAs, thereby optimizing the electronic structure and enhancing the adsorption strength of reaction intermediates, improving the catalytic performance. This study provides a new paradigm for developing novel ARR electrocatalysts and also expands the potential of crystal-phase engineering in other application areas.

Thermal-Rectified Gradient Porous Polymeric Film for Solar-Thermal Regulatory Cooling.

Solar-thermal regulation concerning thermal insulation and solar modulation is pivotal for cooling textiles and smart buildings. Nevertheless, a contradiction arises in balancing the demand to prevent external heat infiltration with the efficient dissipation of excess heat from enclosed spaces. Here, a concentration-gradient polymerization strategy is presented for fabricating a gradient porous polymeric film comprising interconnected polymeric microspheres. This method involves establishing an electric field-driven gradient distribution of charged crosslinkers in the precursor solution, followed by subsequent polymerization and freeze-drying processes. The resulting porous film exhibits a significant porosity gradient along its thickness, leading to exceptional unidirectional thermal insulation capabilities with a thermal rectification factor of 21%. The gradient porous film, with its thermal rectification properties, effectively reconciles the conflicting demands of diverse thermal conductivity for cooling unheated and spontaneously heated enclosed spaces. Consequently, the gradient porous film demonstrates remarkable enhancements in solar-thermal management, achieving temperature reductions of 3.0 and 4.1 °C for unheated and spontaneously heated enclosed spaces, respectively, compared to uniform porous films. The developed gradient-structured porous film thus holds promise for the development of thermal-rectified materials tailored to regulate solar-thermal conditions within enclosed environments.

Noble-Metal-Free High-Entropy Alloy Nanoparticles for Efficient Solar-Driven Photocatalytic CO2 Reduction.

Metal nanoparticle (NP) cocatalysts are widely investigated for their ability to enhance the performance of photocatalytic materials; however, their practical application is often limited by the inherent instability under light irradiation. This challenge has catalyzed interest in exploring high-entropy alloys (HEAs), which, with their increased entropy and lower Gibbs free energy, provide superior stability. In this study, 3.5 nm-sized noble-metal-free NPs composed of a FeCoNiCuMn HEA are successfully synthesized. With theoretic calculation and experiments, the electronic structure of HEA in augmenting the catalytic CO2 reduction has been uncovered, including the individual roles of each element and the collective synergistic effects. Then, their photocatalytic CO2 reduction capabilities are investigated when immobilized on TiO2. HEA NPs significantly enhance the CO2 photoreduction, achieving a 23-fold increase over pristine TiO2, with CO and CH4 production rates of 235.2 and 19.9 µmol g-1 h-1, respectively. Meanwhile, HEA NPs show excellent stability under simulated solar irradiation, as well high-energy X-ray irradiation. This research emphasizes the promising role of HEA NPs, composed of earth-abundant elements, in revolutionizing the field of photocatalysis.

Induced Anionic Functional Group Orientation-Assisted Stable Electrode-Electrolyte Interphases for Highly Reversible Zinc Anodes.

Dendrite growth and other side-reaction problems of zinc anodes in aqueous zinc-ion batteries heavily affect their cycling lifespan and Coulombic efficiency, which can be effectively alleviated by the application of polymer-based functional protection layer on the anode. However, the utilization rate of functional groups is difficult to improve without destroying the polymer chain. Here, a simple and well-established strategy is proposed by controlling the orientation of functional groups (─SO3H) to assist the optimization of zinc anodes. Depending on the electrostatic effect, the surface-enriched ─SO3H groups increase the ionic conductivity and homogenize the Zn2+ flux while inhibiting anionic permeation. This approach avoids the destruction of the polymer backbone by over-sulfonation and amplifies the effect of functional groups. Therefore, the modified sulfonated polyether ether ketone (H-SPEEK) coating-optimized zinc anode is capable of longtime stable zinc plating/stripping, and moreover an enhanced cycling steadiness under high current densities is also detected in a series of Zn batteries with different cathode materials, which achieved by the inclusion of H-SPEEK coating without causing any harmful effects on the electrolyte and cathode. This work provides an easy and efficient approach to further optimize the plating/stripping of cations on metal electrodes, and sheds lights on the scale-up of high-performance aqueous zinc-ion battery technology.

Laparoscopic left hemihepatectomy guided by indocyanine green fluorescence: A cranial-dorsal approach.

BACKGROUND: Advancements in laparoscopic technology and a deeper understanding of intrahepatic anatomy have led to the establishment of more precise laparoscopic hepatectomy (LH) techniques. The indocyanine green (ICG) fluorescence navigation technique has emerged as the most effective method for identifying hepatic regions, potentially overcoming the limitations of LH. While laparoscopic left hemihepatectomy (LLH) is a standardized procedure, there is a need for innovative strategies to enhance its outcomes. AIM: To investigate a standardized cranial-dorsal strategy for LLH, focusing on important anatomical markers, surgical skills, and ICG staining methods. METHODS: Thirty-seven patients who underwent ICG fluorescence-guided LLH at Qujing Second People's Hospital between January 2019 and February 2022 were retrospectively analyzed. The cranial-dorsal approach was performed which involves dissecting the left hepatic vein cephalad, isolating the Arantius ligament , exposing the middle hepatic vein, and dissecting the parenchyma from the dorsal to the foot in order to complete the anatomical LLH. The surgical methods, as well as intra- and post-surgical data, were recorded and analyzed. Our hospital's Medical Ethics Committee approved this study (Ethical review: 2022-019-01). RESULTS: Intraoperative blood loss during LLH was 335.68 ± 99.869 mL and the rates of transfusion and conversion to laparotomy were 13.5% and 0%, respectively. The overall incidence of complications throughout the follow-up (median of 18 months; range 1-36 months) was 21.6%. No mortality or severe complications (level IV) were reported. CONCLUSION: LLH has the potential to become a novel, standardized approach that can effectively, safely, and simply expose the middle hepatic vein and meet the requirements of precision surgery.

Performance evaluation of the high-throughput quantitative Alinity m BK virus assay.

BK virus (BKV) infection or reactivation in immunocompromised individuals can lead to adverse health consequences including BKV-associated nephropathy (BKVAN) in kidney transplant patients and BKV-associated hemorrhagic cystitis (BKV-HC) in allogeneic hematopoietic stem cell transplant recipients. Monitoring BKV viral load plays an important role in post-transplant patient care. This study evaluates the performance of the Alinity m BKV Investigational Use Only (IUO) assay. The linearity of the Alinity m BKV IUO assay had a correlation coefficient of 1.000 and precision of SD ≤ 0.25 Log IU/mL for all panel members tested (2.0-7.3 Log IU/mL). Detection rate at 50 IU/mL was 100%. Clinical plasma specimens tested comparing Alinity m BKV IUO to ELITech MGB Alert BKV lab-developed test (LDT) on the Abbott m2000 platform using specimen extraction protocols for DNA or total nucleic acid (TNA) resulted in coefficient of correlation of 0.900 and 0.963, respectively, and mean bias of 0.03 and -0.54 Log IU/mL, respectively. Alinity m BKV IUO compared with Altona RealStar BKV and Roche cobas BKV assays demonstrated coefficient of correlation of 0.941 and 0.980, respectively, and mean bias of -0.47 and -0.31 Log IU/mL, respectively. Urine specimens tested on Alintiy m BKV IUO and ELITech BKV LDT using TNA specimen extraction had a coefficient of correlation of 0.917 and mean bias of 0.29 Log IU/mL. The Alinity m BKV IUO assay was performed with high precision across the dynamic range and correlated well with other available BKV assays. IMPORTANCE: BK virus (BKV) in transplant patients can lead to adverse health consequences. Viral load monitoring is important in post-transplant patient care. This study evaluates the Alinity m BKV assay with currently available assays.

Amorphous ZnSnOx Hollow Spheres Enable Highly Efficient CO2 Reduction.

Carbon dioxide (CO2) adsorption and electron transport play an important role in CO2 reduction reaction (CO2RR). Herein, we have demonstrated a new class of diverse hollow ZnSnOx (ZSO) through the amorphization of hydroxides to enhance CO2 adsorption and accelerate electron transport. The amorphization is occurred by calcination process, as indicated by Fourier transform infrared spectroscopy and Raman spectra. In particular, the ZnSnOx hollow spheres (ZSO HSs) achieve a high Faradaic efficiency (FE) of HCOOH up to 92.7 % at best, outperforming the commercial ZSO (Comm. ZSO, 85.7 %). ZSO HSs also exhibit durable stability with negligible activity decay after 10 h of successive electrolysis. In-situ attenuated total reflectance infrared absorption spectroscopy further reveals strong adsorption of CO2 and rapid intermediate configuration transformation in amorphous ZSO HSs. This work demonstrates the practical application of ZSO for CO2RR and provides a new insight to create efficient CO2RR electrocatalysts.

Red Carbon Mediated Formation of Cu2O Clusters Dispersed on the Oxocarbon Framework by Fehling's Route and their Use for the Nitrate Electroreduction in Acidic Conditions.

The oligomers of carbon suboxide, known as red carbon, exhibit a highly conjugated structure and semiconducting properties. Upon mild heat treatment, it transforms into a carbonaceous framework rich in oxygen surface terminations, called oxocarbon. In this study, the abundant oxygen functionalities are harnessed as anchors to create oxocarbon-supported nanohybrid electrocatalysts. Starting with single atomic Cu (II) strongly coordinated to oxygen atoms on red carbon, the Fehling reaction leads to the formation of Cu2O clusters. Simultaneously, a covalent oxocarbon framework emerges via cross-linking, providing robust support for Cu2O clusters. Notably, the oxocarbon support effectively stabilizes Cu2O clusters of very small size, ensuring their high durability in acidic conditions and the presence of ammonia. The synthesized material exhibits a superior electrocatalytic activity for nitrate reduction under acidic electrolyte conditions, with a high yield rate of ammonium (NH4 +) at 3.31 mmol h-1 mgcat -1 and a Faradaic efficiency of 92.5% at a potential of -0.4 V (vs RHE).

Size-independent boosting of near-infrared persistent luminescence in nano-phosphors via a magnesium doping strategy.

Near-infrared (NIR)-emitting persistent luminescence nanoparticles (PLNPs) are ideal optical imaging contrast reagents characterized by autofluorescence-free optical imaging for their frontier applications in long-term bioimaging. Preparation of uniform small-sized PLNPs with excellent luminescence performance is crucial for biomedical applications, but challenging. Here, we report a facile magnesium doping strategy to achieve size-independent boost of NIR persistent luminescence in typical and most concerned ZnGa2O4:Cr3+ PLNPs. This strategy relies on the doping of Mg2+ ions that with similar size of Zn2+ ions in the host lattice matrix, and concomitant to the electron traps tailoring tuned by varying the feed ratio of Mg2+. The optimum Mg2+-doped PLNPs give a long afterglow time (signal-to-noise ratio (SNR) = 31.6 at 30 d) without changing the desirable uniform sub-10 nm size of the original nanocrystals. The appropriate increase of the depth and concentration of electron trap contribute jointly to the enhancement of lifetime (488 % longer, 20.57 s) and afterglow time for 700 nm persistent luminescence. Meanwhile, these PLNPs keep the original excellent rechargeability and promote over 60 times increase of SNR in renewable in vivo imaging. This simple strategy provides a basis for new opportunities to address the critical challenge of effective optical performance boost in small-sized PLNPs.

Langmuir-Blodgett Film Formed by Amphiphilic Molecules for Facile and Rapid Construction of Zinc-Iodine Cell.

Zinc-iodine batteries (ZIBs) are promising candidates for ecofriendly, safe, and low-cost energy storage systems, but polyiodide shuttling and the complex cathode fabrication procedures have severely hindered their broader commercial usage. Herein, a protocol is developed using phospholipid-like oleylamine molecules for scalable production of Langmuir-Blodgett films, which allows the facile preparation of ZIB cathodes in less than 1 min. The resulting inhomogeneous cathode allows for the continuous conversion of iodine. Moreover, the amine group of the oleylamine molecule at the cathode is capable of producing [OA*I+]I3- charge-transfer complexes with iodine, which facilitates the rapid migration of iodine and results in a highly reversible iodine conversion process. Consequently, the as-prepared ZIBs can deliver over 2000 cycles at 0.5 mA cm-2 with a capacity retention of 75.3%. This work presents a novel, straightforward, and efficient method for the rapid construction of ZIBs.

Boosting Cathode Activity and Anode Stability of Lithium-Sulfur Batteries with Vigorous Iodic Species Triggered by Nitrate.

Lithium-sulfur (Li-S) battery with a sulfurized polyacrylonitrile cathode is a promising alternative to Li-ion systems. However, the sluggish charge transfer of cathode and accumulation of inactive Li on anode remain persistent challenges. An advanced electrolyte additive with function towards both cathode and anode holds great promise to address these issues. Herein, we present a new strategy to boost sulfur activity and rejuvenate dead Li simultaneously. In the polar electrolyte containing I2-LiNO3 additives, I3 -/IO3 - are triggered significantly by the reaction between NO3 - and I- ions. The I3 -/IO3 - are reactive to insulated Li2S product of cathode and inactive Li on anode, thus accelerating the conversion reaction of sulfur and recovering Li sources back to battery cycling. The in situ/ex situ spectroscopic and morphologic monitoring reveal the crucial role of iodine in promoting Li2S dissociation and inhibiting dendritic Li growth. With the modified electrolyte, the symmetric Li||Li cells deliver a lifespan of 4000 h with an overpotential less than 12 mV at 0.5 mA cm-2. For Li-S cells, 100 % capacity retention up to thousands of cycles and enhanced rate capability are available. This work demonstrates a feasible strategy on electrolyte engineering for practical applications of Li-S batteries.

Highly Porous Yet Transparent Mechanically Flexible Aerogels Realizing Solar-Thermal Regulatory Cooling.

The demand for highly porous yet transparent aerogels with mechanical flexibility and solar-thermal dual-regulation for energy-saving windows is significant but challenging. Herein, a delaminated aerogel film (DAF) is fabricated through filtration-induced delaminated gelation and ambient drying. The delaminated gelation process involves the assembly of fluorinated cellulose nanofiber (FCNF) at the solid-liquid interface between the filter and the filtrate during filtration, resulting in the formation of lamellar FCNF hydrogels with strong intra-plane and weak interlayer hydrogen bonding. By exchanging the solvents from water to hexane, the hydrogen bonding in the FCNF hydrogel is further enhanced, enabling the formation of the DAF with intra-layer mesopores upon ambient drying. The resulting aerogel film is lightweight and ultra-flexible, which possesses desirable properties of high visible-light transmittance (91.0%), low thermal conductivity (33 mW m-1 K-1), and high atmospheric-window emissivity (90.1%). Furthermore, the DAF exhibits reduced surface energy and exceptional hydrophobicity due to the presence of fluorine-containing groups, enhancing its durability and UV resistance. Consequently, the DAF has demonstrated its potential as solar-thermal regulatory cooling window materials capable of simultaneously providing indoor lighting, thermal insulation, and daytime radiative cooling under direct sunlight. Significantly, the enclosed space protected by the DAF exhibits a temperature reduction of 2.6 °C compared to that shielded by conventional architectural glass.

Biodegradable reactive compatibilizers for efficient in-situ compatibilization of poly (lactic acid)/poly (butylene adipate-terephthalate) blends.

The wide application of fully biodegradable polylactic acid/polybutylene terephthalate (PLA/PBAT) blends in environmentally friendly packaging were limited because of poor compatibility. Normal compatibilizers suffer from poor thermal stability and non-biodegradability. In this work, epoxy copolymer (MDOG) with different molecular structures were made of 2-methylene-1, 3-dioxoheptane, and glycidyl methacrylate as raw materials by free radical copolymerization. MDOG copolymers have good biodegradability and a high thermal decomposition temperature of 361 °C. The chemical reaction of the epoxy groups in MDOG with PLA and PBAT during the melting reaction improved the interfacial bonding by decreasing the particle size of PBAT. Compared to the PLA/PBAT blends, the tensile strength and fracture toughness of PLA/PBAT/MDOG blends were enhanced to 34.6 MPa and 115.8 MJ/m3, which are 25 % and 81 % higher, respectively. As a result, this work offers new methods for developing thermally stable and biodegradable compatibilizers, which will hopefully promote the development of packaging industry.

Inducing Directional Charge Delocalization in 3D-Printable Micro-Supercapacitors Based on Strongly Coupled Black Phosphorus and ReS2 Nanocomposites.

The growing interest in so-called interface coupling strategies arises from their potential to enhance the performance of active electrode materials. Nevertheless, designing a robust coupled interface in nanocomposites for stable electrochemical processes remains a challenge. In this study, an epitaxial growth strategy is proposed by synthesizing sulfide rhenium (ReS2 ) on exfoliated black phosphorus (E-BP) nanosheets, creating an abundance of robust interfacial linkages. Through spectroscopic analysis using X-ray photoelectron spectroscopy and X-ray absorption spectroscopy, the authors investigate the interfacial environment. The well-developed coupled interface and structural stability contribute to the impressive performance of the 3D-printed E-BP@ReS2 -based micro-supercapacitor, achieving a specific capacitance of 47.3 mF cm-2 at 0.1 mA cm-2 and demonstrating excellent long-term cyclability (89.2% over 2000 cycles). Furthermore, density functional theory calculations unveil the positive impact of the strongly coupled interface in the E-BP@ReS2 nanocomposite on the adsorption of H+ ions, showcasing a significantly reduced adsorption energy of -2.17 eV. The strong coupling effect facilitates directional charge delocalization at the interface, enhancing the electrochemical performance of electrodes and resulting in the successful construction of advanced micro-supercapacitors.

Emerging Two-Dimensional Carbonaceous Materials for Electrocatalytic Energy Conversions: Rational Design of Active Structures through High-Temperature Chemistry.

Electrochemical energy conversion and storage technologies involving controlled catalysis provide a sustainable way to handle the intermittency of renewable energy sources, as well as to produce green chemicals/fuels in an ecofriendly manner. Core to such technology is the development of efficient electrocatalysts with high activity, selectivity, long-term stability, and low costs. Here, two-dimensional (2D) carbonaceous materials have emerged as promising contenders for advancing the chemistry in electrocatalysis. We review the emerging 2D carbonaceous materials for electrocatalysis, focusing primarily on the fine engineering of active structures through thermal condensation, where the design, fabrication, and mechanism investigations over different types of active moieties are summarized. Interestingly, all the recipes creating two-dimensionality on the carbon products also give specific electrocatalytic functionality, where the special mechanisms favoring 2D growth and their consequences on materials functionality are analyzed. Particularly, the structure-activity relationship between specific heteroatoms/defects and catalytic performance within 2D metal-free electrocatalysts is highlighted. Further, major challenges and opportunities for the practical implementation of 2D carbonaceous materials in electrocatalysis are summarized with the purpose to give future material design guidelines for attaining desirable catalytic structures.

Lattice-Strained Metallic Aerogels as Efficient and Anti-Poisoning Electrocatalysts for Oxygen Reduction Reaction.

Lattice strain engineering optimizes the interaction between the catalytic surface and adsorbed molecules. This is done by adjusting the electron and geometric structure of the metal site to achieve high electrochemical performance, but, to date, it has been rarely reported on anti-poisoned oxygen reduction reaction (ORR). Herein, lattice-strained Pd@PdBiCo quasi core-shell metallic aerogels (MAs) were designed by "one-pot and two-step" method for anti-poisoned ORR. Pd@PdBiCo MAs/C maintain their original activity (1.034 A mgPd -1 ) in electrolytes with CH3 OH and CO at 0.85 V vs. reversible hydrogen electrode (RHE), outperforming the commercial Pd/C (0.156 A mgPd -1 ), Pd MAs/C (0.351 A mgPd -1 ), and PdBiCo MAs/C (0.227 A mgPd -1 ). Moreover, Pd@PdBiCo MAs/C also show high stability and anti-poisoning with negligible activity decay after 8000 cycles in 0.1 m KOH+0.3 m CH3 OH. These results of X-ray photoelectron spectroscopy, CO stripping, and diffuses reflectance FTIR spectroscopy reveal that the tensile strain and strong interaction between different elements of Pd@PdBiCo MAs/C effectively optimize the electronic structure to promote O2 adsorption and activation, while suppressing CH3 OH oxidation and CO adsorption, leading to high ORR activity and anti-poisoning property. This work inspires the rational design of MAs in fuel cells and beyond.

Anti-Freezing Electrolytes in Aqueous Multivalent Metal-Ion Batteries: Progress, Challenges, and Optimization Strategies.

Aqueous rechargeable multivalent metal-ion batteries (ARMMBs) have attracted considerable attention due to their high capacity, high energy density, and low cost. However, their performance is often limited by low temperature operation, which requires the development of anti-freezing electrolytes. In this review, we summarize the anti-freezing mechanisms and optimization strategies of anti-freezing electrolytes for aqueous batteries (especially for Zn-ion batteries). Besides, we investigate the possible interactions and side reactions between electrolytes and electrodes. We also analyze the problems between electrolytes and electrodes at low temperature, and propose possible solutions. The research progress in the field of low temperature energy storage for aqueous Mg-ion, Ca-ion, and Al-ion batteries, and the challenges faced in their anti-freezing electrolytes are investigated in detail. Last but not least, the outlook on the energy storage applications of ARMMBs is provided to guide the future research.

Perovskite Oxide as A New Platform for Efficient Electrocatalytic Nitrogen Oxidation.

Electrocatalytic nitrogen oxidation reaction (NOR) offers an efficient and sustainable approach for conversion of widespread nitrogen (N2 ) into high-value-added nitrate (NO3 - ) under mild conditions, representing a promising alternative to the traditional approach that involves harsh Haber-Bosch and Ostwald oxidation processes. Unfortunately, due to the weak absorption/activation of N2 and the competitive oxygen evolution reaction, the kinetics of NOR process is extremely sluggish accompanied with low Faradaic efficiencies and NO3 - yield rates. In this work, an oxygen-vacancy-enriched perovskite oxide with nonstoichiometric ratio of strontium and ruthenium (denoted as Sr0.9 RuO3 ) was synthesized and explored as NOR electrocatalyst, which can exhibit a high Faradaic efficiency (38.6 %) with a high NO3 - yield rate (17.9 µmol mg-1 h-1 ). The experimental results show that the amount of oxygen vacancies in Sr0.9 RuO3 is greatly higher than that of SrRuO3 , following the same trend as their NOR performance. Theoretical simulations unravel that the presence of oxygen vacancies in the Sr0.9 RuO3 can render a decreased thermodynamic barrier toward the oxidation of *N2 to *N2 OH at the rate-determining step, leading to its enhanced NOR performance.